~ Vauxhall XE required parts ~
The parts list, with part numbers, where to source and approx prices (as of Sept '04)
Listed with Cheapest First. ** = Optional Items
| Part Name | Part No. | Sources | Approx Price | Notes |
|---|---|---|---|---|
| Engine | ||||
| Engine | 20xe or C20xe | Scrap yard, e-bay, local papers | £200 - £500 | Look out for the Coscast head version, early GTE, Cavalier, Calibra. |
| Cambelt | 209111 | QED | £21 | For Engine after 14142839 - Not OE part, OE part available |
| " " | 209011 | QED | £22 | For Engine before 14142838 - Not OE part, OE part available |
| " " | V90530598 (Late) | Vauxhall Dealer | £26 | There are 2 types, early and late models, check with your dealer |
| Front Crank Oil seal | V90322669 | Vauxhall Dealer | £19 | Check and replace if necessary |
| Rear Oil seal | V90280462 | Vauxhall Dealer | £17 | Check and replace if necessary |
| Rocker cover gasket | V90466638 | Vauxhall Dealer | £25 | Needed if you modify the Cam cover baffle |
| Up-rated Rod Bolts | 109-6001 | Rallynuts | £50 | Comes with lubricant and instructions |
| " " | n/a | Yukspeed | £68 | Essential if you want to rev over 6,500 rpm |
| " " | 206051 | QED | £75 | Race Specification |
| " " | RB1K | SBD | £75 | Other types available |
| Sump | ||||
| Shallow in Alloy | n/a | Yukspeed | £125 | Big wing steel, 110mm deep |
| " " | 210130 | QED | £153 | Don't think it includes baffle or pickup pipe |
| " " | 1730000 | Westfield | £231 | Includes Baffle & pickup pipe |
| " " | SMP-2K | SBD | £250 | Includes Baffle & pickup pipe, 100mm deep |
| Sump Gasket | V90411386 | Vauxhall Dealer | £24 | 2 part cork gasket |
| " " | V90528632 | Vauxhall Dealer | £25 | Rubber edged splash plate |
| " " | 211029 | QED | £35 | Not sure what type |
| Mounts | ||||
| Mounts | Varies | Westfield | £60 a pair | Need to state whether Wide or Narrow body. |
| " " | MNT-ENG3 | SBD | £38 per 1 | Only R/H listed |
| Mounting Rubbers | MNT-ENG2 | SBD | £12 | To Suit Westfield |
| " " | 1722201 | Westfield | £16 a pair | Rubber mounts, needed for above. |
| Oil filter | ||||
| Oil Filter | HOF252 | Halfords | £5 | 74mm deep, fitted to most of the Daewoo range. Use short stud |
| " " | 210002 | QED | £9 | Short Filter |
| Short Oil Filter Stud | V0090322488 | Vauxhall Dealer | £5 | Short Stud to fit short oil filter, M18 thread |
| " " | 210005 | QED | £8 | Short Stud to fit QED Filter - UNF fitting |
| Remote Filter unit ** | 1750001 | Westfield | £125 | Does not include filter |
| Bellhousing | ||||
| Alloy Bellhouse | n/a | Yukspeed | £160 | Cheapest around, with fulcrum pin (150mm upright) |
| " " | BELH1 | SBD | £182 | No fulcrum pin, £2.60 extra (150mm upright) |
| " " | BELH1 | Rallynuts | £182 | With Fulcrum pin fitted (150 mm upright) |
| " " | 3209002 | Westfield | £256 | Expensive but you get all the bolts, gaskets |
| " " | n/a | Yukspeed | £10 | Can be purchased locally if you know the bolt sizes |
| Clutch | ||||
| Clutch Plate | n/a | Yukspeed | £38 | For Standard plate, also do heavy duty |
| " " | QH C1094 AF | Dealer, Motorparts Store | ?? | From a 2.3 Diesel Sierra/Sapphire. Shop around as most only sell complete clutch assemblies |
| " " | 208002 | QED | £54 | Standard plate to fit Ford G/Box |
| " " | 3242001 | Westfield | £63 | Standard clutch plate |
| " " | n/a | SBD | From £124 | Organic clutch plate, a large variety |
| Clutch Cable ** | ?? | Ford Spares | ?? | Only if you don't have one |
| Clutch Cover | N/A | n/a | Can use Standard | Retain the original Vauxhall Clutch cover |
| Release Bearing | QH LUK500007110 | Dealer, Motorparts Store | ?? | From Sierra |
| " " | 1624270 | Ford Spares | ?? | From Sierra |
| " " | n/a | Yukspeed | £10 | Good Price |
| " " | 218014 | QED | £23 | To fit Ford box |
| " " | CLT-RB1 | SBD | £24 | Will fit SBD Release Arm |
| Clutch Release Arm | 218012 | QED | £29 | To fit Ford G/Box |
| " " | n/a | Yukspeed | £30 | Believed to be off an RS2000 |
| " " | CLT-RA1 | SBD | £39 | Will fit SBD B/House |
| Spigot Bearing | n/a | Yukspeed | £6 | Remove old spigot bush from engine |
| " " | CLT-SB1 | SBD | £7 | 15mm Bearing |
| Induction | ||||
| Inlet Manifold | n/a | Yukspeed | £110 | To fit Webers or Dellortos |
| Inlet Manifold Gasket | V90448102 | Vauxhall Spares | £4 | Standard Gasket |
| " " | 211020 | QED | £5 | n/a |
| Carb Fitting kit | n/a | Yukspeed | £25 | Includes Studs, cups, rubbers and nuts |
| Carburettors | 45 Sidedraft carbs | WSCC Forum | £200 Used | 40's will fit but run out of steam @ 6000 rpm |
| " " | 45 Webers | Weber or Europa | £620 pair (New) | 40's are the same price new |
| " " | 116001 | QED | £728 pair | 45 Webers Jetted to Suit |
| " " | 45 Dellortos | Dellorto | Can't find price | Some say better than Weber? |
| Exhaust | ||||
| Manifold | 1711011 | Westfield | £231 | Said to be a bit restrictive but not confirmed |
| " " | C-2.0L-XE | SBD | £588 | Possibly the best system around, only in S/Steel |
| Gasket | V90265553 | Vauxhall Dealer | £18 | Standard Gasket |
| 211018 | QED | £9 | n/a | |
| Silencer | n/a | n/a | n/a | Down to personal choice |
| Ignition | ||||
| Dizzy & Coil | n/a | Scrap yard | £25 | From Mk2 Cavalier or Early Astra |