~ Steel Conrods & Pulleys~
Some quality Conrods for your Vauxhall XE engine or Alloy Crankshaft Pulley's
Click on pictures below to enlarge
FORGED CONRODS
Set of new 4340 forged steel H beam conrods to fit the 2.0l 16V XE/LET engine.
Unused and unfitted complete with new ARP 2000 rod bolts. Fully shot peened and machined to the tightest tolerances: C/C:143.1mm, +/-0.025mm, B/E:52.0mm, +0.012/-0mm, B/E thickness: 26.39mm, +0/-0.05mm, B/E width: 78.15mm, +/-0.1mm, S/E:21.0mm, +0.02/+0.03mm, S/E thickness:22.0mm, +/-0.05mm.
Small ends are silicon bronze bushed and the caps are dowelled for a perfect fit and location. These rods are immensly strong and I have had the steel independantly analysed to ensure that it easily meets the spec for SAE 4340. The rods are a balanced individually numbered set and each one weighs only 562g with the bolts.
They are a direct replacement for the standard rod and will therefore fit anywhere and with any piston that uses a standard rod such as the Omega and Accralite "high intruder" high compression pistons. The only piston not suitable for this rod is the "slipper" type as this requires a rod with a longer C/C.
Bargain at £350.00
Overal View, Quality items
Big end view
Shows machining quality
Small End view
ALLOY CRANKSHAFT PULLEY
Light weight alloy race pulley, weighing in at only 215 grams. Normally pulley weighs 1665grams.
Available in RED or Blue anodized finish and Standar Alloy finish.
Will
suit redtop 2.o XE Engine without power steering.
£45.00 plus £2 P&P (1st class recorded)
Close up of pulleys
3 colours available
Contact: Peter on 07971 118721 or Email